Types of Door Locks for Patio Doors in Aylesbury
Sliding patio doors in aylesbury is a excellent way to bring more light to your home. They are also easy to maintain and are secure from burglars.
A customer contacted us to discuss the possibility of installing a new lock for their front door. After a wide range of options were analyzed, they decided to install a Yale night latch fitted and a new set of keys provided.
Sash Locks
Sash locks are among the most popular mortice locks, and are operated by the combination of latches and deadbolts. They are incorporated into the material of the door and can be operated using a key to unlock or lock them. These locks are ideal for both back and front doors because they are extremely secure. Sash locks are available in various sizes to match all door thicknesses, and can be installed on both hardwood and UPVC doors.
There are a number of different kinds of sash locks available, but the most popular are the five lever sash lock and the three lever sash lock. The mortice sash lock with five levers is one of the most secure options and it meets British Standards for thief-resistant locks. It also has a striker and face plate that can be found in a variety of finishes to co-ordinate with the door knobs or handles. The three-lever lock is not as secure, but it still offers enough security for home use. It is easy to customize because it has fewer levers. It can also be installed on any internal door.
The the rim-profile sashlock is another type of sashlock. These are similar to sash locks, but differ in that they are not fitted into the door. They attach to the surface and can be locked from both sides. They are perfect for interior doors that require privacy, such as bedrooms and bathrooms.
A window lock that is sash-based is a great option to protect your home from intruders as well as ensure that your children are safe. They work by stopping the sash from opening too far which means that your children aren't able to fall out of the window. They come in a range of sizes, ranging from 3 inches to 5 inches, and are a great option for any window restoration project.
Installing sash window locks is easy and can be accomplished by anyone who likes D.I.Y. To begin, you will need an ruler and pencil to mark the central location at which you'd like to place the lock. Once you've marked the location then you must remove any old screws that hold the sash in place. After taking out the screws, clean off any remaining debris or paint flecks. Then, you can put in the new fastener.
Mortice Locks
A mortise lock is a relatively large mechanism that fits into the interior of the door. They're commonly seen in older buildings as well as modern upmarket residential construction. You can still buy a mortise-style lock in hardware stores. It's a strong and secure choice. It is ideal for the security of areas that are prone to traffic, such as hospitals or schools.
It is impossible to utilize a mortise locking system with a standard knob or handle as the bolt will only retract when a key is inserted. It is also important to select knobs and handles that are perfectly sized to fit into the lock case. The bolt won't be able to move until you turn the knobs. If you're not sure, consult your lock diagram for more details.
Mortice locks are typically constructed from strong materials that are able to endure wear and tear. They are extremely tough to break even under extreme pressure. This durability makes them an ideal choice for doors in high-traffic areas that are likely to be exposed to lots of abuse like hospitals and schools.
Similar to rim locks mortise deadlocks are available in different styles and security levels. There are three-lever mortice locks that are typically used for internal doors, such as bedrooms or in-between porches. They aren't as secure as mortice locks with five levers because they are equipped with smaller levers.
It's important that you check the British Standard approval of any mortice lock that you purchase for an exterior door. This will ensure your door is safe and stop burglars from entering your home and stealing valuables.
A mortise lock operates by locking into a pocket that is cut into the inside of the door frame. This pocket is known as a mortise and the lock is held by the help of a "lock case" that is attached to the frame by using nails or screws. A hard collar is typically fitted on the outside of the lock to prevent it from being taken away with a pipe-wrench.
Cylinder locks
Cylinder locks are a good choice on uPVC as well as timber or composite doors. These locks consist of two components - the lock, which opens the door latch or dead bolt, and the cylinder that controls it. The design allows both parts to be replaced separately in the event of need. This is beneficial if a part does not perform as expected or you wish to upgrade to a safer cylinder.
The lock cylinder is equipped with series pin pairs in it. It is the part of the lock that receives keys. When a correct key is put in into the lock, the notches on the key push the pins up to different levels so they can rotate and unlock the door. If you insert a wrong key, the notches will not align and most of the pins remain in their original position.
There are a variety of cylinder locks that are that are available, ranging from basic pin tumblers up to high-security versions that resist multiple lock picking methods. The more pins that are in a cylinder lock, the harder it is to pick them. A normal cylinder lock will typically have six pins, whereas higher security versions may contain as many as 13 pins. These pins are described as "security pins". There are many security pins, including spool pins with narrow waists machined to resembles a cotton spool, and serrated pins that have one or more narrow grooves cut into them.
A cylinder lock is easier to install than mortise locks because it does not require the door frame to be cut. However, it is still an excellent idea to have your door frame professionally measured and fitted to ensure the lock is correctly positioned. If your door isn't square you'll have to choose an offset cylinder.
Cylinder locks are less expensive than smart locks and offer a good level of security. They are a great choice for homes that are less secure or for those who want to lock their house quickly. They are particularly effective if your door already has a hole that is pre-drilled for the lock.
Mullion Locks
A mullion is a central part of a double doorway. It divides it into two sections, allowing the other side to be used as a single opening. It can be fixed or removed. Mullions are available in metal, wood or plastic. They can be used together with mortise and rim lock exit devices. They enhance the security of double doors as well as provide a wider exit than rods that are vertical. double glazing repairs aylesbury are also perfect for doors that see frequent use, such as doors that are fire-rated and hurricane-proof.
In a typical installation, the mullion is attached to the frame head and secured to the floor during construction. However certain mullions are made to be removed, making them an excellent choice for commercial situations where the location of a door could change frequently. If a business owner would like to install an employee back entrance then they can take out the mullion and allow larger furniture to be able to pass through.
The removal of screws and bolts is required for conventional mullions. These fittings are set into the floor or the top of the door's frame. This is a tedious and time-consuming task that usually requires two people. Over time, repeated removals could cause the fittings and mullions loosen. Moreover, when the mullion is not in position, carts, gurneys and heavy machinery aren't able to pass through the doorway.
To solve this issue an e-mullion with a key is now available, allowing for quick and simple removal of a mullion from its top bracket by simple operation of the rim cylinder if a wide unobstructed opening is required. The PDQ 9300 Series removable mullions are specifically designed to be used with the 6300/6400 Series Rim Exit Devices for pairs of doors. They are also designed to allow the top bracket of the mullion to be removed from upwardly extending protrusions 42 and 43 on the bottom fitting 20 which is permanently fixed to the floor 14. This releases the latch and the mullion is able to be temporarily removed. The mullion will then automatically engage the latch once it is reinstalled.